If you are within the range of the Bluetooth connection, you can see the status of the light, you can see the actual brightness and working conditions, if you are not within the range, you cannot see the status of the light.

Independent sensors can be renamed (only after June 2023 version)

After the user sets the sensor mode and turns off the sensor mode halfway, it only needs to click the automatic mode to return to the sensor mode set by the user without resetting.

See if the paired control device can control the current device (APP, remote control, switch)

1. The distance of the infrared sensor is about 5-10 meters (too high outdoor temperature may cause the infrared sensor to fail)

2. The distance of the microwave sensor is about 8-12 meters (confirm whether the installation environment is an iron house or there are other large pieces of metal materials, whether there is equipment running for a long time in a short distance, and whether it will cause interference to the module)

It is recommended to add the upper limit of 30 lights at one time, and add all lamps in multiple times. Adding too many devices at one time takes a long time due to the signal congestion; it is recommended that the distance between adding lights and lamps be within 20 meters.

1. Only use the timer in the APP, you cannot choose a specific date

2. If it is equipped with a gateway, you can use remote timing, and you can choose a specific date

1. You need to delete the device that needs to be moved from zone 1

2. Then search and add it through zone 2