1. The mobile phone saves the floor plan or photos of the current area, and enters the arrangement to import the saved photos.

2. Then drag the light group or single light to the corresponding position on the floor plan to control the corresponding device on the map.

1. When multiple users use the same zone, the set data may be different.

2. After user 1 finishes setting, upload the current setting information, and user 2 clicks download, then their data can be displayed synchronously.

1. The installation location of the remote control needs to have an available WiFi network, and it must also be equipped with our WiFi gateway.

2. The process of remote control: first add the Bluetooth switch to the APP, then enter the APP data collection, long press the WiFi gateway (automatic mode + switch) and the red light flashes to indicate that it has entered the pairing state, then the APP enters the account password to be connected, and then Just add it.

3. The gateway is successfully added, enter the data collection, select the device to be uploaded, and then scan the code to log in to the cloud platform to see the current device information and control it.

Groups can be selected for timing (including single light, all lights, and multiple lights can be selected)

1. The device is powered off

2. The device is reset

3. The device signal is not received, it shows offline

Only available in devices with a gateway, and can be downloaded and viewed through the Cloud platform

No, currently only single map import is supported, and only supports JPG image format.

It is subject to the setting after multiple users use it at the same time.